Aquaborne Ceramithane Clear Finish is an ultra-premium, water borne, acrylic-urethane finish coating that crosslinks to form a very hard, impervious film. Crosslinking unites the molecules to form a continuous barrier that protects the surface. The high build formula achieves a luxurious, deep, rich finish with just two coats. This product is very stain resistant and passes the Maple Flooring Manufacturers Association and Kitchen Cabinet Manufacturers tests. Use inside on wood, primed metal and masonry. Protects the finish of highly polished metals like brass, copper, aluminum and stainless.
- For interior use
- Proprietary resin and formulation
- Passes Maple Flooring Institute and Kitchen Cabinet Manufacturers Association tests
- High build, easy to apply
- Stands up to the toughest commercial applications
Use inside on wood products, floors, furniture, woodwork, cabinets, and paneling. Excellent for polished metals such as copper, brass, chrome, stainless steel and aluminum. Seals masonry floors such as concrete and terrazzo.
Surfaces must be clean and free of oil, dirt and grease. If coating over previous coated surfaces, clean and sand lightly. Never use steel wool as fragments will rust, always use sandpaper. If using over new oil stain allow the stain to dry a minimum of 24 hours, 48 hours is ideal. If applying over a water based stain allow the stain to dry a minimum of 2 hours.
350-450 square feet per gallon on smooth non porous surfaces.
Dries to touch in 1 hour at 70F and 50% relative humidity. Can be recoated after 4 hours, no more than 2 coats per day. If coating is cloudy allow more time to dry before recoating.
Soap & Water
Ceramithane has a slight amber color. When used over very light wood such as white pine or over white substrates, a yellow color may be noticed. It is suggested Ceramithane be tried over a small area before coating very light substrates.
2 Reviews Hide Reviews Show Reviews
Called the manufacturer and discussed all the details for application. Very helpful
I bought the Satin Ceramithane to seal a bar top. Dealing with Mullers was easy and pleasant as I called them with questions. The product arrived in a timely manner and the billing process was seamless. The actual application was similar to any polyurethane. It dried to the shine and tint I wanted. All reviews I read said that this is the hardest surface available without using epoxy.